Final Piece- Vanishing Fabric

Looking back on all the previous techniques and development within my sketchbook it gave me inspiration to include the the use of vanishing fabric on my wall hanging. I chose to do the exact same design I had done previously that was based upon my primary research of octopus suckers as this was a simple yet effective design that I knew would compliment the other features of the wallhanging well without ‘taking over’ it.

I carefully considered the colours of the threads I chose as I needed something that would be bold and stand out against the dyed up background, therefore, I chose an orange and a red. One problem I did encounter with this was that it was time consuming and after consulting with a technician they suggested putting my machine on a different setting in order to speed up the process. This proved to be very successful and as a result of this I was able to then complete these pieces within the time constraint. However, with one of the pieces I accidentally used the wrong type of fabric and when I went to wash it away I came to the realisation it wasn’t vanishing fabric. To overcome this problem I carefully tore the pieces of fabric away from the embroidery and used some red and orange procium dyes which matched up the colours to the other pieces I created.

When pinning these onto the wallhanging I chose to place them within the felted balls so they looked as if they were spilling out and taking over certain the piece much alike to how things in the natural world grow. I have also decided to have them coming off the wall hanging and they can be pinned to the wall so that the viewer can see the finer details of the piece.


Final Piece- Felting

Upon research on pinterest I had the idea to add some felt pieces to my work. Although I hadn’t experimented with felting earlier during this project I was familiar with it and I feel that this would give me an excellent opportunity to add a three dimensional aspect to my work.

To do this I used a technique which involved cutting three circular shapes from some stiff plastic and grouping them together one on top of the other to create a base to felt on. I added merino wool that was brightly coloured and reflective of the colours present in marine life. I overlapped it on one side of the circular bases and wet it down with warm soap water, I repeated this on the opposite side and then gently began felting until the the felt started to shrink causing the inner base to start wrinkling, after this process I made a small incision which allowed me to remove the base and then stuffed the felted sphere with bubble wrap so that I could continue felting it. Although the incision wasn’t initially going to be part of the design I really liked the hole it created as it looks very alike to shell forms on coral reefs. Due to the fact that these felted balls were quite time consuming to make I only created a few which in the end worked in my favour as they would have over taken the wall hanging if I was to have made more. I also made some smaller felted balls that required a lot less time so that I could get a range of different scales.

When it came to the placement of these particular pieces I rearranged them a number of times and in the end I came to the decision that they looked far better clustered together as you then get a real feel for a reflection of the natural aspects of a coral reef. Furthermore, the variety of coloured yarns and wools used on each felted piece brought out the contrasts between each one. I attached these to the wallhanging and one another with hand embroidery as it would have been too difficult to do with a machine.

Final Piece- Changing the Colours

After much consideration I decided to go against the idea of bringing  angelina fibres onto my final piece due to the fact I felt that the metallic aspect of this particular material would create to much of a distraction from the embroidery and therefore would override it. Therefore, I came across a few difficulties as I knew that the piece needed a lot more to it in order for it to have a built up texture and show the natural growth that takes hold of a coral reef, furthermore I also wanted to show the techniques I have learnt over the past year within surface pattern and textiles and on my piece.

To do so I pinned my piece up on a wall to view it in its final light and see what needed adding to it. There was a number of things that I have changed since doing this and one of which was the protium dyes.

As I explained on a previous blog post I felt that I had been too careful with the colours I had added within the embroidery as they were too subtle and didn’t stand out. Therefore, I decided to choose bold colours that were reflective of the embroidery threads I had used e.g. purples,pinks, reds. This certainly made the piece stand out more however I felt that these colours looked unnatural and after watching Blue Planet for research it became obvious to me that I needed to use more natural colours as when you view things through the aquariums and cameras the water and the lenses magnifies everything and creates slight alterations to the colours. I feel that this may have mislead me a little. So experimented with shades of blues and greens and used bleach to ease off some of the more bold and natural colours that I had previously added, I chose to cover the entire piece due to the fact that there is no ‘blank spaces’ under the ocean and these colours would bounce off the white walls profoundly when my piece is being exhibited. By soaking the wall- haning with water before adding these colours when I dropped the inks onto the fabric they bled into one another and created some really interesting natural textures. After this stage of adding the inks I felt that I had a more clear idea of where my piece was going and what the next stages of improvement would be.

Final Piece- Fragmented Pieces

Whilst I was considering the next stages of my final piece I had the idea to cut the hanging up into sections so that I could hang them collectively but in fragmented pieces. This in turn means that I can create a natural looking edge on every section as planned whilst I was developing final outcomes. Despite this not being part of the original plan I feel that this was an the right turn for me to take which has added a new dimension to my final piece. This means that the pieces can have something that could contrast to one another making the overall textures more interesting. Once I have moved further along with the development of the wall hanging I’m going to cut some more natural curves into the edges.

Research Into Fabrics

I have been doing some research in order to find a possible material that could be used to build upon layers onto my wall hanging and I have found a few possible options.

One of which could be using a mesh or netting. I found some on eBay which is actually a bridal veil material but it is evident from the images that you can see through it and I feel that it wouldn’t distract away from the first layer.

Furthermore, I also came across a really interesting fabric known as ‘Angelina Fibre’ and I found this website which has offered me a lot of valuable information about the fibre/ material. If the college doesn’t have any of this in the textiles department then I will purchase some of this website.

Screen Shot 2017-05-03 at 14.36.28Screen Shot 2017-05-03 at 14.36.36

I feel that the way in which the fibres will reflect the light will create a really interesting effect, I think I will use colours that are still quite similar to the embroidery threads that I have already used and I will start out doing some samples to ensure that it will definitely work well with the piece.

Final Piece- Next Stages 

I have started to consider what I will next add to my wall hanging. One of the possibilities that I have thought of is to add another layer on top using a transparent/ translucent fabric with a larger scale detailed embroidery piece over this.

However, due to the fact that I have used pastel colours for my first layer I worry that this may not work due to the fact that won’t stand out through the piece and could possibly distract the viewer away from the fine details.Therefore, I am going to conduct some research into possible materials that I cold use that wouldn’t do this.

Another idea could be to use vanishing fabric as this would then just sit over small part of the piece as opposed to completely covering it.